choosing the Aegis Solo 3 Discovery Pack, you can use your kit upon receipt.

Arômes et Liquides selected a pack with: an Aegis Solo 3 kit by Geek Vape, 2 VTC 6 18650 batteries by Sony, and an MC1 battery charger by Xtar.

Certified IP68, the Aegis Solo 3 kit is resistant to dust, water, and shocks, and works with a 18650 single battery. Delivering a maximum power of 100W, it has the Z Sub Ohm clearomizer, a 5.5ml capacity, and is particularly meant for an airy draw in direct inhaling (DL).

Geekvape's Aegis Solo 3 Discover Pack

Geekvape’s Aegis Solo 3 Discover Pack

An intuitive locking system:

With a similar design but with slightly different dimensions of 137.4 x 27.6 x 40.9mm for a weight of 189g.

The front side is composed of:

The Fire button
The 0.96″ color screen
The setting buttons

Geekvape's Aegis Solo 3 kit

Geekvape’s Aegis Solo 3 kit

Equipped with an AS Chip 4.0 chipset, this mod has a Touch Lock system, an innovative locking. Touch the Aegis 3 mod with your palm to instantly unlock it.

Geekvape gave the mod an IP68 certification so it would resist dust, water, and shocks.

The Touch Lock system of Geekvape's Aegis Solo 3 kit

The Touch Lock system of Geekvape’s Aegis Solo 3 kit

How does the Aegis Solo 3 kit work?

With a performing chipset by Geek Vape, the Aegis Solo 3 presents an army of protection against overvoltage, polarity inversion, or dry hits (e-liquid leaks).

You’ll access diverse settings thanks to the screen, and select if needed:

POWER mode: manual adjustment of the power from 5 to 100W
SMART mode: automatic adjustment of the power according to the coil installed in the clearomizer
BOOSTING mode: selection of the highest power handled by the coil used
ECO mode: selection of the lowest power handled by the coil
TCR mode: temperature setting according to the type of coil wire used (if you swap the Z Sub Ohm clearomizer with an RBA atomizer)
MEMORY mode: saving of settings (up to 5) according to the type of coil used

The screen of Geekvape's Aegis Solo 3 kit

The screen of Geekvape’s Aegis Solo 3 kit

A supply in 18650 single battery:

Not only does the Aegis Solo 2 S100 kit resist shocks but it also presents a good vape capacity! This endurance is made possible by its single 18650 battery power system.

To insert your 18650 battery, unscrew the protective cap beneath the mod to release the cover. Be sure to respect the correct polarity when inserting.

And in this pack, Arômes et Liquides has decided to include not one, but two Sony 18650 VTC6 batteries, enabling you to use your kit while one of the batteries is charging!

The 18650 single battery compartment of Geekvape's Aegis Solo 3 kit

The 18650 single battery compartment of Geekvape’s Aegis Solo 3 kit

In case you’re out of battery, Geekvape gave the mod a USB-C port, including a cable.

Note however that it is recommended to use an external charger like the one included in this pack to recharge your battery.

The USB-C port of Geekvape's Aegis Solo 3 kit

The USB-C port of Geekvape’s Aegis Solo 3 kit

A battery charger included in the pack:

Even if the Aegis Solo2 S100 kit has a USB-C port (cable included), we recommend using an external charger for your battery as much as possible.

That’s why Arômes et Liquides completes this nice pack with the MC1 charger by Xtar allowing you to fill your battery with energy!

The MC1 charger by Xtar in the Aegis Solo 3 Discovery Pack

The MC1 charger by Xtar in the Aegis Solo 3 Discovery Pack

The Z Sub Ohm clearomizer:

Geek Vape equips its Aegis Solo 2 S100 kit with the Z Sub Ohm clearomizer.

With a 24mm diameter, it has a bulb Pyrex with a 5.5ml e-liquid capacity and an 810 drip tip for airy vape sessions!

The Z Sub Ohm clearomizer of Geekvape's Aegis Solo 3 kit

The Z Sub Ohm clearomizer of Geekvape’s Aegis Solo 3 kit

The Z Series coils:

Your Aegis Solo 2 S100 kit is delivered with two Z Series coils meant for an airy draw in direct inhaling (DL).

Compatible with all the collection of Z Series coils, you’ll use the two included with the following values:

0.25Ω Z coil: to use between 45 and 57 watts
0.20Ω Z coil (pre-installed): to use between 70 and 80W

After two to three weeks of use, your coil starts to show some signs of wear (loss of flavors, light burnt taste), it is time to replace it with a new one.

For this:

Take the clearomizer of the mod
Unscrew the bottom part
Pull on the used coil (don’t hesitate to use the key included)
Soak a new coil of some e-liquid drops
Insert it in the same place as the old one
Screw the clearomizer base
Fill it with e-liquid
Wait for 5 to 10 minutes before vaping it so the new coil is correctly primed with e-liquid

The top airflow of Z Sub Ohm:

Located on the top of the clearomizer, the setting of air intakes thanks to a wheel that you’ll turn to your liking: to free more or less the airflow hole.

You’ll easily alternate between an airy inhaling and a slightly more draw according to the vape type used.

With the Z Sub Ohm, Geek Vape bets on a leakproof system thanks to its position at the top of the clearomizer.

The top airflow of Z Sub Ohm clearomizer of Geekvape's Aegis Solo 3 kit

The top airflow of Z Sub Ohm clearomizer of Geekvape’s Aegis Solo 3 kit

How to fill your e-liquid tank?

Thanks to its 5.5ml bulb pyrex, the Z Sub Ohm of Aegis Solo 2 S100 kit offers a great e-liquid capacity.

But that’s not all! Geek Vape also equips it with a top filling system (by the top) allowing you to quickly and easily access the filling hole. Once you’ve unscrewed the top cap, you only have to insert the tip of your bottle in one of the two large slits and proceed to the filling in the e-liquid of your tank.

When the time comes to fill the 5.5ml tank, get your e-liquid bottle with a dropper tip, then:

Unscrew the top cap of the clearomizer
Insert the bottle tip in one of the two filling holes
Pour your e-liquid, never pour anything into the central chimney hole
Carefully close the top cap
Wait for 5 to 10 minutes before vaping if you use a new coil

The filling of Z Sub Ohm clearomizer of Geek Vape's Aegis Solo 3 kit

The filling of Z Sub Ohm clearomizer of Geek Vape’s Aegis Solo 3 kit

Box contents:

1 100W Aegis 3 mod
1 Z Sub Ohm clearomizer
1 0.2ohm Z Series coil
1 0.4ohm Z Series coil
1 USB-C cable
1 spare pyrex
1 set of spare pieces
1 user guide

The Aegis Solo 3 kit is made by Geekvape. It is sold without batteries.

Box contents of Geekvape's Aegis Solo 3 kit

Box contents of Geekvape’s Aegis Solo 3 kit

The MC1 charger by Xtar:

Included in the Aegis Solo 3 beginner pack, the MC1 Xtar will be your ally to refill it with battery!

Handy and compact, you’ll slide it into your Sony VTC6 18650 battery (included) by respecting the direction of insertion of the positive and negative poles.

Its compact dimensions of 92 x 22 x 25mm make it discrete and easy to transport.

You’ll connect the micro-USB cable (included) that you’ll link to the external energy source (USB).

Characteristics of MC1 Xtar charger:

Single battery charger
LED indicator
Functioning temperature: 0 – 40°C
Intensity of recharging current: 1A
Types of batteries: Li-On / IMR
Compatible with: 14500, 14650, 17500, 17670, 18350, 18500, 18650, 20700, 21700, 26650

2 Sony VTC6 20A 3,000mAh 18650 batteries included in the pack:

Ready-made, the Aegis Solo 3 pack holds all the necessary material to vape. To complement the Aegis Solo 3 kit from Geek Vape, you’ll find not only the MC1 battery charger from Star, but also not one, but two 18650 VTC6 3000mAh 20A batteries by Sony.

Compatible with your kit, this battery offers a capacity of 3,000mAh. This set of two will enable you to make the most of your electronic cigarette without interruption: use one of the two batteries while the other refuels on its MC1 charger!

Characteristics of the Sony VTC6 20A 3,000mAh battery:

Weight: 48g
Dimensions: 18x65mm
Chemistry: INR Lithium-Ion
Capacity: 3,000mAh
Maximum continuous discharge rate: 20A
Maximum pulse discharge rate: 30A
Minimal tension: 2V
Maximal tension: 4.25V

Be sure to observe all safety rules, both when using the battery and when transporting or storing it:

Keep away from heat sources
Do not use if worn or damaged (use a wrap to repair)
Make sure the battery is inserted into the mod or external charger with the positive and negative poles aligned
Always use an external charger rather than charging via your kit’s USB port
Always use a protective case when transporting or storing your battery pack

The Sony VT6 3,000mAh 20A batteries of Aegis Solo 3 discovery pack

The Sony VT6 3,000mAh 20A batteries of Aegis Solo 3 discovery pack

Pack contents:

1 Aegis Solo 3 mod
1 Z Sub Ohm clearomizer
1 5.5ml spare tank
1 0.2ohm Z Series coil (pre-installed)
1 0.25ohm A Series coil
1 key for coils
1 set for spare pieces
1 USB-C cable
1 user guide
2 Sony VTC6 3,000mAh 20A batteries
1 MC1 Xtar charger

The Aegis Solo 3 Discovery pack is offered by Arômes et Liquides (A&L).

Contents of Aegis Solo 3 Discovery Pack by Arômes et Liquides

Contents of Aegis Solo 3 Discovery Pack by Arômes et Liquides

Characteristics:

Maximum power	100w
Volume	5.5ml
Battery type	18650 x1
Height	137.4mm
Material	Stainless steel and zinc alloy
Width	27.6mm
Depth	40.9mm
Mod type	Box
Batteries included	No
Weight	189g
Mod type	Electronic
USB charging	Yes
Chipset	AS Chipset
Chipset version	Geek Vape
Compatible coils	0.1 to 3 Ohms
Temperature control	Yes
Tank	Pyrex
Fill type	From above
Drip-tip	810
Connector pin	510
Configuration	Temperature Control / Variable Wattage
Expertise level	Intermediate
Inhaling type	Direct
IP Certification	Yes
Battery	1 Battery
Battery type	18650
Format	Mod
Airflow	Top

eGo Pen Battery w/charger 1100mAh

Description

Related products

Aegis Solo 3 Discovery Pack

CBD Terpenes Vape Pack with GeekVape Wenax Q

eGo Pen Battery w/charger 350mAh

Geek Vape Aegis L200 Vape Kit Bundle

Geek Vape Aegis Legend 2 Kit & E-Liquid Bundle